Surge Protection Devices
United Machinery Corporation, Authorized Channel Partner of Phoenix Contact Presents Type 1, 2, and 3 surge protection protects against malfunctions and defects caused by overvoltages. In the absence of effective protection, high costs are likely due to system failures. In the worst-case scenario, the affected equipment will need to be repaired or replaced. The multi-stage concept from Phoenix Contact provides effective protection for systems and devices. , Surge protection refers to the protection of systems and electrical devices against excessively high voltage peaks caused by switching operations and lightning strikes. An effective lightning protection strategy combines internal and external lightning protection. Protect the power supplies, data, and signals in your system. Use the reliable surge protection solutions available in our various product ranges as part of your internal lightning protection strategy.
Types of Surge Protection Device:
- Type-I or Class B Surge Protection Device
- Type – I + II or Class B+C (Three Phase and Single Phase)
- Type – I & II or class B&C
- Type II or Class C Surge Protection Device
- SOLAR PHOTOVALTIC Surge Protection Device
- Replacement Plugs & Bases
- TYPE – III or Class D
- SPD for Information Technology
Type-1 Surge Protection Device – Combination type – FLT 35 CTRL-2.0/I- Article No. -2800115
Type 1/Class I/B arrester (lightning current arrester) with encapsulated arc chopping spark gap and ignition electronics with control lamp, single-channel. Protection level: 2 kV. Housing width: 17.5 mm (1 pitch)
Type-1 Surge Protection Device – Combination type – FLT 50 N/PE CTRL-2.0 – Article No. 2800109
Lightning current arrester with encapsulated N-PE spark gap and ignition electronics, 1-channel. Protection level 1.5 kV. Housing width: 17.5 mm (1 Div.)
Type-1 Surge Protection Device – Combination type – FLT 35-260- Article No. 2800110
Type 1 / Class I / B arrester (lightning current arrester) with encapsulated arc chopping spark gap, 1-channel. Housing width: 17.5 mm (1 Div.)
Type 1+2 special combined lightning current and surge arrester – FLT-SEC-T1+T2-3S-350/25-FM – 2905470
Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N)
Type 1+2 special combined lightning current and surge arrester – FLT-SEC-T1+T2-1S-350/25-FM – 2905466
Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 1-phase power supply networks, with separate N and PE (L1, PE, N).
Type-B&C Surge Protection Device
PHOENIX CONTACT MAKE CLASS B & C LIGHTING AND SURGE PROTECTION SYSTEM ITEM AS PER RDSO SPECIFICATION NO. RDSO/SPN/165/2012
SOLAR Photovoltaic Surge arrester – VAL-MS 1000DC-PV/2+V Article No. 2800628
Surge protective device for 2-pos. isolated and grounded 1,000 V DC PV systems, for DIN rail mounting, 3-pos. base element, three pluggable temperature-monitored protective elements, status message on each plug.
Type-II Surge Protection Device – Surge arrester – VAL-MS 320/3+1
Surge protective device, 4-channel (in 3+1 circuit), for installation on NS 35/7,5 voltage: 230 V AC
Type-II Surge Protection Device – Surge arrester – VAL-MS 320/3+1/FM
Surge protective device combination, 4-channel, for installation on NS 35/7,5, with remote indication contact (FM) as changeover contact, voltage 230 V AC
Type-II Surge Protection Device – Surge arrester – VAL-MS 320/1+1
Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.
Type-II Surge Protection Device – Surge arrester – VAL-MS 320/1+1/FM
Surge protective device for 3-conductor power supply systems (L1, N, PE), comprised of two individual base elements, connected with one MPB bridge, FM contact, and protective plugs, for mounting on NS 35.
Type -II Surge arrester
Type -II Surge arrester consisting of base element with remote indicator contact and protective connector with high-capacity varistor, for mounting on NS 35/7.5, 1-channel
Suitable for 24-60V
Type -II Surge arrester
Type -II Surge arrester consisting of base element with remote indicator contact and protective connector with high-capacity varistor, for mounting on NS 35/7.5, 1-channel
Designed for 120V
Replacement Plugs and bases for SPD.
Type- III – Device protection – PLT-SEC-T3-24-FM-UT Article No. 2907916
Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 24 V AC/DC
Type-III Device protection – PLT-SEC-T3-60-FM-UT Article No. 2907917
Type 3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 60 V AC/DC
Type- III – Device protection – PLT-SEC-T3-120-FM-UT Article No. 2907918
Type 2/3 surge protection, consisting of protective plug and base element, with integrated status indicator and remote signaling for single-phase power supply networks. Nominal voltage: 120 V AC/DC
Surge protection for information technology – D-LAN-CAT.5-HC Article No. 2800763
Surge protection for data networks up to 1 Gbps. For use in Ethernet, Power over Ethernet (PoE, mode A and mode B), token ring, ISDN, and DS1. RJ45 attachment plug with separate grounding cable and snap-on foot for NS 35 DIN rails.
Surge protection for information technology – DT-LAN-CAT.6+ Article No. 2881007
Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE+) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
Surge protection for transceiver systems – C-UFB-24DC/E Article No. 2782313
Attachment plug with surge voltage coarse and fine protection, for coaxial signal interfaces with floating shield, signal voltage 24 V. Connection: BNC socket/plug